CUSTOMER BENEFITS

 

 

PRODUCTS

  • striplube

    StripLube SSL
    Minimum-lubrication systems with 2 to 12 nozzle outlets and automatic quantity control

  • lubecube

    LubeCube
    The patented lubrication module for the development of productive, customised lubrication systems.

  • digilube

    DigiLube SDL
    Modular lubrication system based on LubeCube system components.

  • digilube

    DigiLube SDLA
    Modular lubrication system with extraction unit, based on the LubeCube system components.

  • sal

    Siegfried Advanced Lubrication SAL
    Modular lubrication system for the most demanding requirements for flexibility and operating ease, based on the LubeCube system components

  • absaugmodul

    SUCTION UNIT SAM
    With 4-level filter systems and oil recovery

Consumption

Umfeld

 

Savings on lubrication

 

Conventional solution

SAL-Streifen 1

 

Optimal solution with SAL

SAL-Streifen 2

 

Reproduzierbarkeit en

Umruesten

 

Sicherheit durch perfekte Reproduzierbarkeit

Folgende Parameter werden gespeichert und beim
Werkzeugwechsel automatisch wieder hergestellt:

 

Changeover time

Umruesten

 

Reduction of changeover time

 

Hidden costs

Reinigen

 

Reduction of hidden costs 

 

Integration

Integration

 

Integration of lubrication control into the tool protection system or directly into the press control

 

Customised solutions

Box5

 

Adjustment of the spray chamber to meet specific
requirements

Profilkammer

 

Striplube SSL

SSLB

The slim oiling system for strips and tools

The Striplube SSL is a micro process-controlled minimum-quantity lubrication system, based on proven pneumatic micro pumps. The required lubrication quantity can be individually set as needed for each nozzle.
The Striplube is synchronised with the press by means of a control input. Same enables automatic adjustment of the lubricant quantity to the actual press stroke rate, if necessary.
In the case of error, the integrated maximum opening and oil level monitoring stops the press, thus ensuring high process reliability.
Micro fine droplets of lubricant are evenly and sparingly applied by air.

 

 

Performance characteristics

Accessories

The large amount of spray chambers, nozzles and accessories ensures the precise, customised oiling of stamp strips and tools.

ssl-zubehoer

LubeCube

SAL-LubeCube

 

The perfect lubrication solution for every stamping process

The patented LubeCube forms the core of our minimum-quantity lubrication systems, DigiLube and SAL, around which ingeniously customised lubrication systems can be developed. One LubeCube is used per nozzle or lubrication point. Compacted within the minimum of space, each individual LubeCube has all the necessary components, such as a pump, motor, control electronics and valve. Therefore, each nozzle is entirely individually controllable in respect of both the quantity of lubricant and the carrying air. Due to the extremely short distance between the pump and nozzle, excellent reaction times are achieved at the press when using the LubeCube in the on/off operation mode.


The LubeCube is adjustable to your requirements

The LubeCube is designed for several units to be modularly assembled to spray ramps and spray chambers. Since the lubricant, air and control lines of one LubeCube are directly connected to the next, only a single supply line to the ramp is necessary.

 

SAL-LubeCube-Box

Additional LubeCubes, e.g. for intool lubrication and for the connection of smaller spray chambers, can be added afterwards without difficulty.

 

SAL-LubeCube Rampe

Performance characteristicsAir and lubricant outlet for 1 nozzle

 

 

 

 

Digilube SDL

SDLB6

The flexible lubrication system for strips and tools

The minimum-quantity lubrication system, the SDL B6, for strip and intool lubrication showcases the advantages of our well-proven and patented LubeCube system with its control focused on the basic functions. The quantity of the lubricant for the up to 6 nozzle outlets can be individually set. All tool-specific parameters can be stored. The DigiLube is synchronised with the press via a control input. Same allows for automatic adjustment of the lubricant quantity to the actual press stroke rate. Upon request, DigiLube systems can be modularly expanded with additional functions at any time.

 

SDLB6 mit Staender

Performance characteristics

 

Accessories

A large number of spray chambers, nozzles and accessories enables the precise, customised lubrication of stamp strips and tools.

 

LubeCube boxes

For strip widths of up to 300 mm.

slcxa 300

LubeCube ramps

For smaller lube boxes and intool lubrication.

SAL LubeCube Rampe

Lube boxes

For connection to a LubeCube ramp.
For strip widths of up to 300 mm.

slxc pp boxen

Lube nozzles

For direct lubrication of strips and for intool solutions.

duesen

Software

For integration into existing controls.

SDL Software

 

Digilube SDLA

SDLB6

The flexible lubrication system with extraction

The SDLA is based on the cost-effective SDL B6 and also offers the advantages of our well-proven and patented LubeCube system. Additionally, the SDLA has a powerful and well-proven extraction unit, which effectively prevents the discharge of emissions. Due to the possibility to re-use filtered residual lubricants, the consumption of expensive lubricants is furthermore reduced.
The lubricant quantity for the up to 6 nozzle outlets can be individually set. All tool-specific parameters can be stored. The DigiLube is synchronised with the press via a control input. Same allows for automatic adjustment of the lubricant quantity to the actual press stroke rate. Upon request, DigiLube systems can be modularly expanded with additional functions at any time.

 

SDLA

Performance characteristics

 

Accessories

A large number of spray chambers, nozzles and accessories enables the precise, customised lubrication of stamp strips and tools.

 

LubeCube boxes

For strip widths of up to 300 mm.

slcxa 300

LubeCube ramps

For smaller lube boxes and for intool lubrication.

SAL LubeCube Rampe

Lube boxes

For connection to a LubeCube ramp.
For strip widths of up to 300 mm and also for special
solutions as per the profile examples herebelow.

 

slxc blum

 

Lube nozzles

For direct lubrication of strips and for intool solutions.

duesen

Software

For integration into existing controls.

SDL Software

 

SAL

SCU100 SAS050

 

Siegfried Advanced Lubrication SAL.

This intelligent and modularly assembled lubrication system, fitted with the LubeCube, has virtually no limits. Furthermore, the system can be configurated, and – if necessary – also expanded, for the most demanding lubrication tasks.

 

SAL

 

In its simplest version, the system comprises of, apart from a control unit and ventilation, at least one LubeCube box or a LubeCube ramp and a storage canister.

 
Example 1:

SAL software 1

 
 

Up to 5 different lubrication circuits can be controlled for demanding tasks. For example, one lubrication circuit with one LubeCube box for strip lubrication and a second circuit with a LubeCube ramp for intool lubrication. For every lubrication circuit, any storage canister with the appropriate lubricant can be selected via the user interface. If required, the system can – also later on – be supplemented with a powerful extraction unit.

 
Example 2:

SAL software 2

 
 
Example 3:

SAL software 3

 
 

Control unit

The control unit has a 8,4" colour display with a touchscreen. All processes are displayed by the graphically animated user interface. The set parameters can be saved for any number of tools. Thus, even inexperienced operators can achieve quick and safe conversion and processing with optimal settings. The operation can be carried out either via any of Siegfried's SAS systems or via remote software directly via the operator terminal of the press control.

 

Performance characteristics

 

 

Accessories

A large number of spray chambers, nozzles and accessories enables the
precise, customised lubrication of stamp strips and tools.

 

LubeCube boxes

For strip widths of up to 1 200 mm. With extraction device, if required.

SAL LubeCube Box

LubeCube ramps

For smaller spray chambers and intool lubrication.

SAL LubeCube Rampe

Lube boxes

For connection to a LubeCube ramp.
For strip widths of up to 1200 mm or if required
also for special solutions.

pp boxen

Lube nozzles

For direct lubrication of strips and for intool solutions.

duesen

 

 

Suction unit SAM

SAE

Clean environment when stamping

In order to achieve perfectly even minimum lubrication of stamping strips, fine spraying of the lubricant by the corresponding nozzles is required.
Process-related and dependant on the utilised lubrication, undesired emissions could develop outside the spray chamber.
The modular suction unit SAM effectively prevents leakage.
Furthermore, the possible re-use of filtered residual lubricants could result in savings on expensive lubricants.
The system can be fitted with up to 4 filter levels, according to customer requirements.

 

Performance characteristics

SAE offen